GSM értesítő és vezérlő modul: ROPAM BasicGSM-PS

Kód: G7042
A termék nem elérhető
Kínálat: Könyvtár:

Támogatás

Részletes leírás

GSM Notification and Control Module: ROPAM BasicGSM-PS
View of the BasicGSM-PS module
GSM Notification and Control Module: ROPAM BasicGSM-PS
Another view of the BasicGSM-PS module
GSM Notification and Control Module: ROPAM BasicGSM-PS
The included accessories
BasicGSM-PS is a module dedicated to the integration with control panels, controllers, relays, etc. via binary inputs and outputs. The terminal is equipped with an analog input for cooperation with e.g. temperature sensor, and with LogicProcessor providing advanced logic functions allowing for implementation of home automation systems. All these features combined with an embedded GSM communicator and keyGSM function allowing for control of outputs just by identification of the calling phone (Caller ID/CLIP), make the module a universal notification and control device suitable for very wide range of applications. Additionally, the module can operate as an SMS terminal, capable of sending and receiving text messages via the RS-232 serial port.
The BasicGSM-PS modules (since version 1.4) can be controlled via Android smartphones running dedicated RopamDroid app. RopamDroid is a free application that can be downloaded from GooglePlay, characterized by clear graphical user interface and two-way communication via SMSes. It provides access to the current status and information on any failures, enables monitoring, control and blocking of inputs, control of groups of outputs, monitoring and control of temperature thresholds. By consolidating the data in text messages, the cost of communication is reduced to a minimum.
The configuration and update of the BasicGSM-PS module are performed with the use PartnerGSM software and dedicated RS232-MGSM or USB-MGSM cable.
Features:
  • built-in GSM/DCS/EGSM modem (no SIMLOCK),
  • detection of GSM JAMMING, reporting and registering output states,
  • 8 phone numbers, groups for notifications and control,
  • 8 inputs with NC or NO configuration,
  • AI: 0-10V analog input scalable with physical parameters (e.g. temp=°C, RH=%, p=kPa),
  • FAC input for monitoring the main supply voltage (AC/DC) of system components,
  • 4 outputs controlled by SMS, CLIP, DTMF, failure, AC power loss, JAMMING
  • O112VDC/1A output with short-circuit and overload protection, O2-O4 OC outputs (100mA),
  • outputs controlled with: SMS, CLIP, inputs, module status (alarm, failure etc.)
  • programmable SMSes and VOICE (VSR-2) messages on various system events connected with inputs, outputs, sensors,
  • TerminalSMS: SMS transmission via RS232TTL port from DTE devices (PLC, controllers etc., without #AT commands), ASCI codes, GSM modem and terminal functions (DCE),
  • KeyGSM: output control function by identifying the phone number (CallerID/CLIP) output control function by identifying the phone number (CallerID/CLIP) or SMS from a defined group of users (programmed), with confirmation by SMS,
  • LogicProcessor:
    • 9 logic functions (the arguments are states of inputs, outputs, markers (0/1), temperature thresholds, analog input thresholds, timer signals, other binary signals,
    • 8 time and counting functions such as programmable timers, with triggering and reset arguments as above, and results provided to outputs or markers,
  • 4 timers (24h) for use by LogicProcessor.
  • GPRS monitoring:
    • cooperation with MSR Manager (RopamMSR, being developed),
    • cooperation with Kronos NET (RopamDirect controller) - encrypted TCP/IP communication, two IP addresses, backup SMS transmission, parallel operation with SMS/VOICE notification.
  • integration with audio systems of intercoms / door entry systems,
  • temperature measurement via TSR-1 sensor, thermostat at 2 outputs with hysteresis,
  • two-way audio system, facility eavesdropping option (AMR-1),
  • event date and time (RTC with battery backup),
  • connectivity tests: SMS, SMS STAN, CLIP, MMS,
  • optical indication of GSM signal level and activity,
  • register of 1000 events with an overwrite function,
  • non-volatile configuration memory,
  • transmission and cost reduction functions,
  • support for USSD codes (prepaid SIM cards, service modification),
  • built-in buffer power supply (SMPS),
  • supply voltage 17÷20 VAC or 20÷30 VDC (from Class II PSU),
  • monitoring of AC/DC supply voltage,
  • monitoring and dynamic testing of backup battery.
Applications:
  • electronic burglar alarm systems,
  • home automation systems,
  • programmable time relays,
  • monitoring and control via GSM network,
  • monitoring and control of temperature,
  • monitoring and control of a required parameter (via suitable sensor connected to 0-10 V analog input),
  • control and supervision of power grid systems,
  • access control systems,
  • remote control of various processses,
  • integration with audio systems of intercoms / door entry systems,
  • SMS modem for simple PLCs.
Warranty:
24 months with possibility of extension for another 24 months.

The manufacturer - Ropam Elektronik - gives 24 months warranty since the date of purchase. The manufacturer agrees to extend the warranty for selected devices (according to the terms of the warranty included with a product) for the next 24 months in the case of sending an application including copies of the sales document and invoice from the installation company. The equipment should be installed only by professionals - the installation company must be recommended by the manufacturer or at least its scope of activities must include installation of electrical systems, which should be confirmed by a license.
Name BasicGSM-PS
Code G7042
Number of inputs
8 (I1-I8)
Analog input
1 (AI, 0-10 V)
Number of outputs
4 (O1-O4)
High-current output
1 (O1)
Low current outputs
3 (OC, O2-O4)
Power supply output
1 (AUX: 12 VDC / 1 A)
Connector for connecting TSR-1 temperature sensor  T1
Connector for connecting voice synthesizer VSR
Logic functions LogicProcessor
Built-in modem GSM/DCS/EGSM
FAC input
1
Supply voltage16 ÷ 20 VAC, min. 30 VA
20 ÷ 28 VDC, min. 0.7 A
Output voltage

13.8 V DC

Max load
 (current capacity)
20 W (1.5 A)
Backup battery

12 V / 1.2-12 Ah (VRL/SLA)

Battery charging currentIbat= 0.3 A max
BAT output protectionlow battery: Ubat<10.0 V (+/-5%); protection against reverse polarity: 1.6 A (PTC - resettable)
DC power failure signaling threshold
U < 11 V
Current capacity of
O1, AUX outputs
Ilim=1.0...1.7 A; Tj/Tc= 125°C
Current capacity of O2 - O4 outputs
100 mA; 30 VDC max.
Current consumption (module)
40 mA / 50 mA / 300 mA (min/avg/max)
GSM modem
SIM900 (Quad-Band, GPRS class 10, CSD); GSM jamming detection
GSM bands 850/ 900/ 1800/ 1900 MHz
(auto-switching)
Transmission options
SMS, VOICE, GPRS,
Binary inputs
NO, NC
Operating environment class: II
temp.: -10°C...+55°C
RH: 20%...90%, no condensation
Terminals AWG: 24-12
Dimensions 118 x 88 x 25 mm
Weight 230 g