KOSARAM
Kosaram üres
Hálózati elemek
Transzformátorok
Twisted Pair Cable Video Transmitter TRN-1/400
Kód: M1668
 
UTP Video Transmitter: TRN-1/400
View of the device

UTP Video Transmitter: TRN-1/400
Front view

The TRN-1/400 transmitter allows to power a camera with thermostat and transmit video signal from the camera by twisted pair cable (UTP, FTP). Video signal from the camera is put to the TRN-1/400 transmitter input, and transmitted by twisted pair cable to the TRO-4/400 M1670 receiver or the TRO-1/400 M1669 receiver. Both he transmitter unit and the receiver unit adapt 75 ohm coaxial cable impedance to twisted pair cable impedance. It guarantees video signal transmission up to 400 meters.
The TRO-1/400 M1669 receiver supplies un-stabilized voltage (max. 40V DC) to twisted pair cable, and the TRN-1/400 transmitter converts it into 12V DC stabilized voltage. It allows to power the camera and the thermostat. Assuming that the power consumption of the camera is 250mA, and 500mA for the thermostat (TT-12E) , the voltage can be sent over the following distances:
LOAD MAXIMUM DISTANCE
AT -24V AC
MAXIMUM DISTANCE
AT -29V
1 camera 250mA 1080 meters 1600 meters
1 camera 250mA
+ thermostat 500mA
260 meters 500 meters
A video amplifier should be used over distances longer than 400m.
Specifications
Name

TRN-1/400 transmitter

Code

M1668

Video Bandwidth up to 50 MHz
Video Insertion Loss 0.5 dB ( for f=5 MHz )
Video Output Impedance 75 ohm
Twisted Pair Impedance 100 ohm
Connector type of the coaxial line BNC socket
Connector type of the symmetrical line RJ-45 plug  (8 pin, 4 pair)
MAX input voltage  DC 45V
Output voltage DC 12V
MAX output current (12V) 900 mA
Weight 94 g
Dimensions: 117x64x30 mm
Diagram of connecting the device to 4 cameras without thermostats
Diagram of connecting the device to a camera without a thermostat
Diagram of connecting the device to a camera with a thermostat
In all applications the RJ-45 plug is connected, in accordance with T568B standard.