KOSARAM
Kosaram üres

Megszűnt termékek

Kültéri kameraház IRH-150 2x IR reflektorral KIÁRUSÍTÁS
Kód: M5302
A termék nem elérhető
The IRH-150 housing has been designed for installing CCTV cameras outdoors.
It provides protection and optimal working conditions in all weather conditions.
Outdoor Camera Housing IRH-150 (2x IR illuminator) - CLEARANCE SALE!
View of the housing

Outdoor Camera Housing IRH-150 (2x IR illuminator) - CLEARANCE SALE!
Rear view
Outdoor Camera Housing IRH-150 (2x IR illuminator) - CLEARANCE SALE!
Bottom view
Outdoor Camera Housing IRH-150 (2x IR illuminator) - CLEARANCE SALE!
View of the inside

Outdoor Camera Housing IRH-150 (2x IR illuminator) - CLEARANCE SALE!
View of the included bracket
Distinguishing features:
  • built-in heater and fan with thermostatic control, wiring and connectors for the camera;
  • two IR illuminators (range up to 80 meters);
  • easy installation due to long cables (coming out of the housing);
  • air vents enable the fan to exchange the air in the housing (cooling, draining excess moisture) to ensure stable operation of the camera in full sunlight or in wet conditions;
  • locking option (with a padlock).
The IRH-150 housing is equipped with thermostatically controlled heater and fan, which ensures stable operation under all temperature conditions. Housings without such features do not provide stable conditions for the cameras, which may suffer from fogging the lenses and water condensation taking place on their components. This results in a significant deterioration in image quality and reliability of the camera point - in extreme cases there is no usable video. The IRH-150 housing is equipped with a shield protecting the camera window against excessive solar radiation, rainfall and snowfall.
The housing is equipped with two infrared Redbeam illuminators, characterized by high IR radiation power at a relatively low power consumption. This is achieved through the use of IR LED arrays instead of individual LEDs. It allows to get range up to 80 m at an angle of 15o (half-power beam). Each beam is shaped by a lens. The expected lifetime of the LED arrays is about 50000 hours, which means that they can work for over 10 years (12/24 cycle)!
The cables coming out of the housing end with BNC and 2.1/5.5 (power) connectors. In addition, there are serial port wires and two wires for connecting a camera with motorized varifocal lens. The additional cables can be optionally used to power other individual circuits of the camera or the housing.
Due to a comparatively small size of the housing (length: 300 mm), the maximum dimensions of an encompassed camera (width x height x length) are 95 x 80 x 150 mm. The housing is dedicated for small cameras with motorized varifocal lenses and for board cameras. Typical box cameras with standard lenses (e.g. Sunell SN-468C/W M11206 with Tokina lens M2311, total length of 190 mm) can be mounted only after rearranging the electronic components of the housing.
Dimension diagram of the housing
Specifications:
NameIRH150
Code:M5302
Outside dimensions with IR illuminators
(width x height x length)
280 x 105 x 300 mm
Max dimensions of the housed camera (width x height x length)95 x 80 x 150 mm
Window pane size
(width x height)
70 x 62 mm
Heateryes
Fanyes
Surface finish
powder paint
Operating temperature-20oC...+50oC
Power 12 VDC / 3 A
Weight2.4 kg
IR illuminators
Number2
Dimensions
(width x height x length)
60 x 61 x 154 mm
Output power
6000 mW
Wavelength850 nm
Half-power beamwidth
15o
Range80 m

 

A termék nem elérhető
 
Kültéri kameraház IRH-150 2x IR reflektorral KIÁRUSÍTÁS
Kód: M5302