View of the illuminator

View of the illuminator from the mount side

Readbeam IRD60 is a modern IR illuminator designed for indoor applications. Its IR LED matrix provides IR light beam of 850 nm wavelength, with angle beam width of 180^o, covering area up to 60 m².

Distinguishing features:

IR illuminators of Redbeam series are modern devices for providing homogeneous IR light in the monitored area in order to enable CCTV cameras to capture images in low-light or no-light environments. The advantage of the series is application of specially designed LED matrix (instead of a conventional set of diodes) which, together with optical lens/es, ensures desired operational angle and distance.

The IR illuminators of the series, cooperating with day/night cameras, make perfect sets for night surveillance. Their twilight sensors in combination with high-efficiency IR LEDs provide very good results, with relatively low power consumption.

A typical IR LED provides output power between 5 mW and 15 mW, so, even in the case of short operational distance, an IR illuminator has to employ at least several such diodes. The Redbeam IRD60 illuminator provides 1800 mW. This means a much larger coverage capacity, in spite of the small size of the device.

Comparison of IR illuminators with similar output power

Another advantage of the matrices is the lifetime of the materials used. Standard heavy-duty IR diodes operate around 6000 hours. In the case of the matrices, the expected lifetime is about 50000 hours. It means that they can work for over 10 years (12/24 cycle)!

The casing is made of aluminum (black finish). To prevent overheating, the body is formed as a radiator. For optimal results, the illuminator should be mounted on the ceiling in the middle of a room.

We also offer IR illuminator with coverage area up to 120 m² - M1646.

There are available cameras with pre-mounted other illuminator/s (M1632): M1130 (one illuminator), M1131 (two illuminators).