KOSARAM
Kosaram üres

WLAN, LAN

Minta megoldások

Drótnélküli adapter telepítése
bemutató eszköz: TP-Link PCI TL-WN551G
Eredeti lengyel változat Lukasz Kopciuch
A telepítési eljárás nagyon hasonló bármelyik TP-Link drótnélküli adapter, kártya esetében
A drótnélküli adapter a 2.4MHz-es elektromágneses hullámokon keresztül teszi lehetővé a kapcsolatot az Access Pointtal (802.11 b/g szabványok), vagy 5 GHz (802.11a szabvány) sáv. A kommunikáció elindításához a kártyát megfelelően be kell szerelni és be kell állítani a számítógépben. Ez a cikk lépésenként írja le, hogyan futtassunk vezeték nélküli összeköttetést, amely PCI WLAN kártyát TP-Link TL-WN551G N2970-et használ fel.
Wireless PCI adapter (eXtended Range) TP-Link TL-WN551G N2970
Először a kártyát be kell rakni egy szabad PCI foglalatba a PC-ben ( behelyezése, miután lekapcsolta a számítógépet,).
A kártya nézete, amit egy PCI foglaltba helyeztek
Miután a PC-t bekapcsolják, megjelenik az üzenetet egy új hardverről (ez megerősíti azt, hogy a kártya megfelelően be lett illesztve). A felhasználónak nem kell a dobozra kattintania - a telepítés egy programmal végrehajtható, amit a gyártó mellékelt. A telepítés vége és az új hardverrel kapcsolatos információk megjelennek egy előugró ablakon.
Rendszerablak
To start the installation, insert the included CD into your CD/DVD drive. From the catalog on the CD-ROM (X:/TL-WN510G_550G_551G) choose the folder adequate for your operating system and run the Setup.exe program.
View of the Setup.exe folder
The installation wizard will install the device.
Click Next.
The installation wizard
There are available three installation options:
  • Install Client Utilities and Driver
  • Install Driver Only
  • Make Driver Installation Diskette(s)
You should choose Install Client Utilites and Driver and click Next.
Selection of installation option
The message informing about system reboot after installation appears. Click Yes.
Question on system reboot
In the next window choose the destination location for the installation files (by default: X:Program filesTP-LINKTWCU). You may browse the folders by clicking Browse, after confirmation click Next.
Selecting destination folder
The next window allows to choose Program Folder for the program icons (if you are not experienced user choose the default location).
Then click Next.
Adding program icons
Another window contains information on TWCU program that is recommended for optimum operation of the wireless card. Use of a third-party tools may result in inappropriate operation or lack of some functions. The choice is made in the next window - click Next.
Information on TWCU program
Choose between:
  • TP-LINK Wireless Client Utility (TWCU) and Supplicant ( Recommended)
  • Third-Party Supplicant
Then click Next.
Choice of configuration tool
The next message informs that the drivers and program will be installed automatically.
To confirm installation, click OK.
Information window
The setup status window informs on installation progress.
The setup status window
In the case of Windows XP (TM) the message below will appear. You should click on Continue Anyway.
Windows XP (TM) compatibility message
The last window informs on successful operations and the need of rebooting the system. Mark Yes, I want to restart my computer now and click Finish.
The message on successful operations and the need of rebooting the system
After this operation there will be two new icons on the tray (close to the clock). Double-click the one on the left (indicated by the yellow arrow).
View of the system tray
The TP-LINK Wireless Client Utility appears. There are three sub-menus available:
  • Current Status - current information on the settings.
  • Profile Management.
  • Diagnostics - information on received/sent data.
The main window of TP-LINK Wireless Client Utility
The first stage is creation of a new profile. Choose the Profile Management sub-menu and click on Scan.
"Profile Management" sub-menu
In the next window there are shown operating networks.
Available network window
Double-click the chosen network. The new window shows, used for creating a new profile. In the General box enter Profile Name.
The new profile window
If the network is protected, click on Security sub-menu, mark the protocol that is used, and click on Configure.
Setting security options
There will be available a specific box, according to the protocol used. The example box applies to WPA/WPA2 Passphrase protocol.
WPA/WPA2 passphrase box
Click OK to finish the task.
View of "Profile Management" window.
Now you can read in the Current Status box the set of parameters. If the new profile has been defined properly, the icons on the system tray will change - see the screenshot below.
View of the system tray
You can find useful the article How to configure a router
The full list of wireless adapters/cards offered by DIPOL:
  • TP-Link USB TL-WN321G 2.4GHz 54Mbit/s N2920
  • TP-Link USB (eXtended Range) TL-WN620G 108Mbit/s N2923
  • TP-Link PCMCIA (eXtended Range) TL-WN510G 54Mbit/s N2930
  • TP-Link PCMCIA (eXtended Range) TL-WN610G 108Mbit/s N2933
  • TP-Link miniPCI TL-WN562AG 2.4 &5 GHz 54 Mbit/s N2965
  • TP-Link mini PCI (eXtended Range) TL-WN662AG 2.4 &5 GHz 108 Mbit/s N2966
  • TP-Link PCI (eXtended Range) TL-WN551G N2970
  • TP-Link PCI TL-WN353GD N2971
  • TP-Link PCI (eXtended Range) TL-WN651G 108 Mb/s N2973
  • TP-Link PCI (eXtended Range) TL-WN653AG 2.4 &5 GHz 108 Mbit/s N2976
  • TP-Link USB 802.11n (draft 2.0) TL-WN821N, 300Mbit/s N3221
  • TP-Link PCMCIA 802.11n (draft 2.0) TL-WN910N, 300Mbit/s N3231
  • TP-Link miniPCI 802.11n (draft 2.0) TL-WN861N, 300Mbit/s N3261
  • TP-Link PCI 802.11n (draft 2.0) TL-WN851N, 300Mbit/s N3271